Breathe Green Mold Gel is a thick, bleach-based gel in a 90 g (3.17 oz) tube. It clings to upright surfaces, so it stays on the mold instead of running off. Please read this manual and the instructions on the product packaging before first use.
Before you start
Wear gloves, and open a window or run the fan so the room is well ventilated.
Keep children and pets out of the room while the gel is working.
This gel contains bleach. Avoid contact with skin and eyes.
Do not mix with other cleaners.
Where to use it
The formula is made for tile, grout, caulk and silicone, and rubber seals, for example:
Shower and tub grout and caulk
Silicone around taps, sinks and basins
Washing machine door seals
Refrigerator strips
Window sills and frames
Do not use it on unsealed wood, aluminum, natural stone or painted walls.
How to use
Unscrew the cap and remove the foil seal, then screw on the applicator tip.
Squeeze the gel directly onto the mold stain, along the dark seams.
Close the door and leave the gel to work for 2 to 3 hours.
Wipe along the seam with a damp cloth and rinse with warm water.
Rinse the tip and recap the tube for storage between uses.
Apply the gel along the dark seams.Leave it to work for 2 to 3 hours.Wipe clean with a damp cloth.
What to expect
This gel is designed for light, surface-level mold. On stubborn, set-in stains results are limited, and a stronger bleach-based stain remover may be needed for full removal.
Storage
Store the product in a cool, dry place.
Keep it out of reach of children and pets, stored securely where the tube can’t be opened or squeezed. Do not swallow.
Need help?
If you have any questions about your product, contact our customer support at +1 (844) 320-9236
